LIOSIL TS 7300 E

The product amount should be tailored to the particular tissue being used. It is generally recommended that the tissue should be coated with between 2 and 8 wt.% of LIOSIL TS 7300 E. If the product is applied by spraying technology, one of the following two criteria should be observed:

1. The atmospheric particle distribution should comply with SEHSC recommendations (see "guidance for aerosol application of silicone-based materials"), i.e. the average particle size should be larger than 30 µm, and less than 1% of the particles should be smaller than 10 µm.

2. If aerosols are formed, we recommend relating to the silicone fluid not to exceed a TLV of 0.2 mg/m³ air which is recommended by ACGIH for mineral oil mist.

The use of the emulsion is recommended for all conventional tissue types such as toilet paper, paper handkerchiefs or cosmetic wipes which may benefit from a certain soft feel. The emulsion can be combined with other organic softeners, provided an adequate compatibility test has been performed.

WACKER SILFOAM® antifoam agent technology has been added to reduce or eliminate foaming during processing. It is therefore recommended that the LIOSIL TS 7300 E be stirred before use. If substantial foaming should still be present, then additional WACKER SILFOAM® antifoam agent technology may be needed.