Dieser Inhalt ist für Indien bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?
LUMISIL® 010 LP A/B
LUMISIL® 010 LP A/B is a 2-part silicone gel(1:1) that is specially designed for injection dispensing systems with low viscosity by room temperature cure or heat conditions for displays.
Properties
Specific features of LUMISIL® 010 LP A/B
- Addition Curing
- Fast curing under heat
- Flowable
- Highly transparent
- No chemical shrinkage
- Optically clear
- Two-component
Data sheets
All surfaces must be clean and free of contaminants that will inhibit the cure of the product
Examples of inhibiting contaminants are sulfer containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.
In mass production, Degassing is essentional process before mixing of materials.
Part A : Part B = 1 : 1
Curing speed can be adjusted by temperature and time. Heat can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
Storage
The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
0001 Dubai
United Arab Emirates
+971 4 709-9911 (Fax)
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Distributors
No distributors were found for this product