This content is for Pakistan. Our system has detected that you are from United States. Do you want to set United States as your new country?

LUMISIL® 206 IM UV A/B

LUMISIL® 206 IM UV is a 2-part transparent optically clear resin(OCR) that is cured by UV condition for displays.


Properties

  • Long liquid retention time after UV for long wet bonding margin
  • 1:1 mixing ratio for processability
  • Low viscosity for multi-purpose dispensing
  • No oxygen inhibition
  • Excellent stress relaxation with high elongation and damping factor by long chain structure
  • Stable bonding for various substrates with stable cohesive failure mode
  • Excellent optical stability and low shrinkage

Specific features of LUMISIL® 206 IM UV A/B

  • Addition Curing
  • Flowable
  • Highly transparent
  • No chemical shrinkage
  • Two-component
  • UV curing
  • Optical bonding for touch screen panel
  • Encapsulation of optical & electronic components
  • Production of damping elements

All surfaces must be clean and free of contaminants that will inhibit the cure of the product.

Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds.

If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.

Curing speed can be adjusted by UV power and time. 

Also heating after UV exposure can accelerate curing process.

We recommend running preliminary tests to optimize conditions for particular application.

  • Recommand Lamp type: UV-A (ex. Mercury, Metal Halide etc.), 365 nm LED (If the applies lamp is 365nm LED lamp, the higher UV irradiance would be better)

Packaging

LUMISIL 206 IM UV A 1KG BOTTLE PE

LUMISIL 206 IM UV A 9KG BOTTLE PE

LUMISIL 206 IM UV B 1KG BOTTLE PE

LUMISIL 206 IM UV B 9KG BOTTLE PE

Storage

The 'Best use before end' date of each batch appears on the product label.


Storage beyond the date specif ied on the label does not necessarily mean that the product is no longer usable.

In this case, however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 (Phone)

My favorites

My products