This content is for Vietnam. Our system has detected that you are from United States. Do you want to set United States as your new country?

WACKER® FINISH CT 46 E

WACKER® FINISH CT 46 E is a nonionic macro emulsion of a reactive, aminofunctional silicone fluid.


Properties

WACKER® FINISH CT 46 E is particularly suitable as softener for the impregnation of fibers and textiles. 

WACKER® FINISH CT 46 E imparts a very soft, drapable and elastic touch to woven and knitted fabrics. 

WACKER® FINISH CT 46 E is considered to be one of the best softening agents for PES/cotton fabrics. 

WACKER® FINISH CT 46 E improves the wash-and-wear properties and the crease recovery angle, sewability and tear strength and reduces abrasion loss. The effects are fast to washing and dry cleaning. 

WACKER® FINISH CT 46 E has very little effect on the degree of whiteness under usual application conditions. Generally, no adverse effect on the shade or color fastness properties of coloured goods is observed. As part of formulations used as fill fiber finish WACKER® FINISH CT 46 E imparts excellent slickness and resilience to the fiber.

WACKER® FINISH CT 46 E does not contain SVHC relevant impurities of more than 0.1% each, e.g. cyclics D4, D5 or D6.

Processing: 

WACKER® FINISH CT 46 E provides permanent effects even without the addition of a catalyst. No specific curing conditions are required if no resins are used. WACKER® FINISH CT 46 E can be applied by padding method, but the finishing liquors should not be exposed to high shear forces as this might cause instability. 5-30 g/l WACKER® FINISH CT 46 E are recommended for padding application. WACKER® FINISH CT 46 E can be applied either alone or together with resins and other finishing agents. Higher crease recovery angles and lower abrasion values can be obtained in resin finishes by using WACKER® FINISH CT 46 E. A wide range of fabric touches can be obtained by combining WACKER® FINISH CT 46 E with conventional softening agents and other additives such as fillers based on polyacrylate.

Typical recipe for woven and knitted materials from synthetic fibres:

0.5 ml/l acetic acid 60 %

10-30 g/l WACKER® FINISH CT 46 E

pad, liquor pick-up about 50 %, dry at about 130 °C

Storage

WACKER® FINISH CT 46 E is stabilized with 2-phenoxyethanol, which is approved for use in cosmetic products. Once opened packages should be used up quickly to prevent contamination by potentially introduced microorganisms.

The "Best use before end" date of each batch is shown on the product label. Emulsions showing signs of creaming should be agitated before use to assure uniform consistency. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals (South Asia)Pte.Ltd.
111A Pasteur, Ben Nghe Ward
700000 Ho Chi Minh City
Vietnam
+84  28  352025772588 (Phone)
+84 8 3825-6721  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

No distributors were found for this product

More products

Products Technical data
pH pH值 Content Appearance 外观
LIOSIL® HC 303 E US 4.5[1] 4.5[1] - - - - - - clear - slightly opaque clear - slightly opaque
POWERSOFT® PE 280 4.5 - 5[2] 4.5 - 5[2] 4.5 - 5[2] 4.5 - 5[2] approx. 25 %[6] approx. 25 %[6] - - clear to slightly yellowish clear to slightly yellowish
POWERSOFT® UP 70 LV 5.0 - 7.0[3] 5.0 - 7.0[3] - - approx. 60 %[7] approx. 60 %[7] extensively clear, colorless to slightly yellowish[5] extensively clear, colorless to slightly yellowish[5] extensively clear, colorless to slightly yellowish[5] extensively clear, colorless to slightly yellowish[5]
WACKER® FINISH CT 45 E approx. 5 approx. 5 - - approx. 40 %[7] approx. 40 %[7] - - milky, white milky, white
WACKER® FINISH CT 46 E 4.5 - 7.0[1] 4.5 - 7.0[1] - - 38.0 - 41.0 %[8] 38.0 - 41.0 %[8] - - milky white milky white
WACKER® FINISH CT 64 E approx. 5[2] approx. 5[2] approx. 5[2] approx. 5[2] approx. 61 %[7] approx. 61 %[7] colorless, opaque[5] colorless, opaque[5] colorless, opaque[5] colorless, opaque[5]
WETSOFT® LV 430 - - approx. 7 approx. 7 approx. 45 %[6] approx. 45 %[6] milky, white[5] milky, white[5] milky, white[5] milky, white[5]
WETSOFT® LV 500 - - 5 - 8[4] 5 - 8[4] approx. 50 %[7] approx. 50 %[7] sligthly hazy, colourless[5] sligthly hazy, colourless[5] sligthly hazy, colourless[5] sligthly hazy, colourless[5]
WETSOFT® NE 430 - - - - approx. 44 %[7] approx. 44 %[7] milky-white macro emulsion[5] milky-white macro emulsion[5] milky-white macro emulsion[5] milky-white macro emulsion[5]
Legend
[1] pH | Indicator strips,  [2] pH value,  [3] pH value | Indicator strips,  [4] pH值 | 指示剂条,  [5] Appearance,  [6] Solid content,  [7] Solid content | Microwave oven,  [8] Solid Content | Microwave oven 

Order

My media


Go to order form

Sales Contact

Wacker Chemicals (South Asia)Pte.Ltd.
111A Pasteur, Ben Nghe Ward
700000 Ho Chi Minh City
+84  28  352025772588 (Phone)

My favorites

My products