SEMICOSIL® 979 EC

SEMICOSIL® 979 EC is a RTV-1 amine cure silicone rubber that cures on contact with moisture in the air.


Properties

  • Low volume resistivity
  • Thixotropic paste
  • Solvated
  • Excellent adhesion to many substrates

SEMICOSIL® 979 EC is an electrically conductive adhesive for use in the electronics industry.

The surface should be clean and free from any contamination. Rubber surfaces may be lightly rubbed with a fine grit sand paper and then wiped clean with a solvent to improve adhesion. SEMICOSIL® 979 EC is not recommended for use with acrylic or polycarbonate substrates.

SEMICOSIL® 979 EC can be readily dispensed using conventional pail pumps equipped with a high pressure flexible fluid hose and extrusion gun. Cartridges may be dispensed with a manual or pneumatic caulking gun. Material may be spread with a spatula either from the pails or cartridges.

Storage

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Australia Pty.Ltd.
1 / 35 Dunlop Road
Mulgrave 3170
Australia
+61  3  9541-8900 (Phone)
+61 3 9541-8989  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 （电话）

My favorites

My products