This content is for Pakistan. Our system has detected that you are from United States. Do you want to set United States as your new country?

NEXIVA® 225

To display additional content and features, we need your consent to set cookies. Please accept "functional cookies" via your cookie settings.

NEXIVA ® GP 225 is a hard dispersible polymer powder based on vinyl acetate and ethylene. It is designed as a general binder for a variety of application in various industries such as Coatings and Adhesives but not limited to.


Properties

NEXIVA® GP 225 provides the following advantages to  manufacturers:

  • Biocide free binder.
  • Allows for the formulation of powder based products.
  • No organic solvents, plasticizers, film forming agents need in formulations.
  • Easier storage, no silo needed.
  • Low odor.
  • No skinning compared to liquid binders.
  • Contains a fine mineral filler as an antiblocking agent.
  • Better workability in extreme climatic conditions.

Powder Paints
  • Suitability

Application

NEXIVA ® GP 225 is recommended as binder for various applications for example interior architectural paints, intumescent coatings and primers due to its adequate binding power and good re-dispersibility in water.

Processing

For the production of dry products, NEXIVA® GP 225 can be mixed into the dry mixture. For the production of ready-to-use paint, we recommend adding NEXIVA® directly to the mill base, just as is the case with the filler. After the powder is mixed with water, it should ideally be applied immediately. It may be necessary to add biocides to the water-mixed powder if the powder has not been used for a prolonged period of time before application.

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Packaging

25 kg paper bags

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Minimum film forming temperature
NEXIVA® 115 4 °C[1] 39.2 °F[1]
NEXIVA® 121 0 °C[1] 32.0 °F[1]
NEXIVA® 225 4 °C[1] 39.2 °F[1]
NEXIVA® 314 0 °C[1] 32.0 °F[1]
NEXIVA® 714 - -
Legend
[1] Minimum film forming temperature | DIN ISO 2115 

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 (Phone)

My favorites

My products